How To Replace a Leaking Toilet

6/15/2020 (Permalink)

Leaking toilet in Murfreesboro, GA

Several Types To Replace a Toilet

If you find a leaking toilet in your commercial restroom, you want to get it fixed as quickly as possible to avoid any further damage. Many things can cause a toilet to leak. Regardless of the cause, you may find that replacing a toilet is easier than you think. If you need a toilet repair in Murfreesboro, GA, there are several steps you can take to replace it.

1. Turn Off the Water
Be sure to turn off the shut off valve. It is usually located on the floor or wall behind the leaking toilet. If in doubt, you can turn off the water to the building. You need to drain and clean the water from the tank and bowl to avoid any spillover.

2. Remove the Toilet
By prying off the caps that cover the closet bolts and using a wrench to remove the hex nuts, you should be able to lift your old toilet off the ground. Be sure to place your hands around the bowl when lifting.

3. Clean the Area
Parts of the old wax gasket may still be attached to the closet flange. You may need to loosen the screws and install a repair strap underneath the closet flange. After tightening the screws, place the new wax gasket over the closet flange.

3. Install Your New Toilet
Connect the water supply to the bottom of the toilet tank and then center the toilet over the new gaskets. Press down on the toilet while tightening the closet bolts. You may need to repeat the pressing and tightening several times to get a secure fit. After replacing the caps, connect the supply tube and open the shutoff valve.
As a business owner with a leaking toilet, you may find that you have additional water damage or want someone to replace it for you. You can hire a professional water remediation company to clean, disinfect, and repair any water damage you may have sustained.